Guide to Research Project Writing

Guide to Research Project Writing

In all tertiary institutions in Nigeria and beyond, research project writing is required of all undergraduate students. As an undergraduate, you are expected to carry out a research project.

Through research, you are able to identify a problem in your community and be able to proffer solution after considering some factors and effects. The first thing you need to do as a research student is to send a research proposal to your supervisor if demanded for.

In your proposal, you will state your research interest. Here, you let your supervisor know how you intend conducting the research, the research instruments you intend using.

The proposal for the topic should also include a brief description, justification for the work, aims and milestones, assumptions to be made, the methodologies involved and the references.

Developing the content of your report writing is very important, in doing this, there are certain guidelines that would be beneficial.
As a rule, the work is usually divided into five chapters excluding the preliminary pages.


  • Title page
  • Approval page
  • Dedication
  • Acknowledgement
  • Abstract
  • Table Of Content
  • List Of Tables
  • List Of Figures
  • List Of Symbols/ Nomenclature (Where Applicable)
  • The Body/Content (Chapter One To Five)
  • References
  • Appendices (Where Applicable)

Research Project Writing Title page Sample:

Here, the name of the institution is put, the title of the report, the name of the Author, then the reason for the report (this is why it is required that students add that it is ‘in partial fulfilment of the course requirement required for the award of the B.Sc degree.’ Then the date is added. It is advised that you use same fonts type and size as used in the body of the work. Times New Roman, 14 font size and single line spacing will be fine and normal for most departments and schools. The month and year to be used should be the tentative/fixed date/month of your defence, not the month you finished the work as there’ll be different months and year of completion for different students in same department and school.
Below is a good example.

Research Project Writing Title Page SAMPLE
Research Project Writing Title Page SAMPLE


Research Project Writing Approval page Sample:

The name of the institution and department, then a statement signifying approval for the work by the supervisor, head of department and external supervisor. Space should be reserved for signatures of all listed parties as well. See example below.

Research Project Writing Approval Page Sample
Research Project Writing Approval Page Sample


Dedication page: This is where you dedicate your work to anyone you like, it could be dedicated to God, your parents, your brother or sister, it could also be to your friends, dead or alive. Note: This is different from the acknowledgement.

Acknowledgement: The researcher here writes to appreciate all that contributed, (technical, financial, moral and otherwise) to the success of the research.

Abstract: This is the synopsis of the research work. It is often written last with the tense in past. Usually less than 100 words summarizing the problem statement, the methodology employed, the findings, conclusion and recommendations. This should be in a single paragraph and the word limit not exceeded.

Table of content: The main heading s and sub-headings and page numbers are listed. This allows for easy page identification and reference. The table of content should be edited at the final stage as well, to correctly capture the reflections in the work.

List of tables/figures/symbols: The list is to aid the reader in locating tables/figures/symbols. It should contain the tag numbers, tag which reflects the content and the page numbers. It should be well-numbered and unambiguous. In the main content, the figure/table should be well-labelled.
(The body of the work)

Chapter One: This is usually the introduction.
This describes the background, scope and purpose of the research. The rest of the report should be tied to the information supplied. The researcher should strive to present sufficient details regarding why the study was carried out.

Chapter two: This is usually the literature review.
This presents basically, the work done by others. It is on the ground work done by others that the current research is to be based, hence the review.

Chapter three: This is usually the research methodology.
Here the language used should be in past tense. It is a sum-up of the research design, procedures, the area and population of study. The data sampling and data sources are detailed as well.

Chapter four: This is usually for data presentation and analysis (results and discussion).
The results obtained in the research are presented her, usually, tables are used or any other visual aid like graph or charts.


Chapter five: This is the conclusions and recommendations.
From the results of the research, conclusions are made, then suggestions for improvement for other researchers with similar interest. Based on the whole happenings, recommendations are proffered.

References: This is a list of all the relevant journals, books and all sources of information consulted in the research work, either online or print. The researcher can select any format to use, it could be MLA referencing format, APA, HARVAD etc

Appendices: This is for all extra materials that were not added to the body of the work.

Don’t forget the page number. The final submission should be very clear, error-free(to a large degree) and as required by standard.

How to do Data Presentation, analysis and Discussion


This comes up, usually, in Chapter Four of the research project. This is where the researcher presents the data collected from respondents though not in the raw form. In their raw forms, it is quite difficult to present and analyse data, which is why there is a need for the raw data to be organized and presented in more compact forms. Subjecting the data to tabulation, grouping or even graphic forms, so as to allow for easy handling and analysis, could do this.

In doing this, the chapter sets out on an introductory note often referred to as “Preamble” where the researcher provides useful background information on the respondents’ group (s), their characteristics with respect to their bio-data and the rate of returns of the data gathering instruments.

After this, he moves on to the main theme of his research by presenting necessary data in the form (s) considered most appropriate for the purpose of analysis. If, as an instance, the tabular mode of data presentation was used, the tables should be well titled; each followed by detailed explanation on the data presented. This pattern should be used for each of the tables presented. Also important under data analysis is the Discussion of Results segment.

This comes up, normally, after the entire presentation exercise had been concluded. It is the segment where the researcher gives a more detailed insight into the issues directly relating to the data presentation and analysis. The segment helps to articulate the issues emanating from the data analysis with respect to whatever implications they have on the subject of investigation.

If the study is concerned with hypotheses testing, it is in this segment that the implications of the outcomes of the tests as they relate to the subject of research would be explained. Here also, conclusions on the relationship of the outcomes of the present study with previous ones are drawn; with a view to establishing a link between the outcomes of the present study and those of previous studies as already established under the literature review. Further more, the researcher dedicates a part of this segment to interpretation of the outcomes of his findings, thereby giving more meaning and sense to the data analysis exercise.

Read also: How to write Research Methodology

The Use of Statistics in Data Analysis

Sulaiman {1997} defined the term statistics as “a branch of applied mathematics, which is employed in analysis of data to facilitate meaningful decision making.” It is also described as the theory and methods of analysis obtained from samples of observation in order to compare data from different empirical observations using hypothesized relationships in order to make meaningful decisions.

Even then, the methods of data analysis depend on the aims and objectives of the study and the nature of the data gathered. It becomes clear from the above, that statistical analysis could be useful for: –

(i) Reducing quantities of data to manageable and understandable


(ii) Aiding decision making

(iii) Summarizing samples from which they are calculated (iv) Aiding reliable references and decisions from hypothesis

Statistics thus serves as a tool used in collecting organizing, analysing and interpreting data. Generally speaking, statistical methods are categorized into broad classes of Descriptive and Inferential Statistics. Descriptive Statistics are often used to summarise the data collected, while Inferential Statistics are used to determine the generalizability of findings arrived at, through the analysis of a sample, to the larger population.

Note that Descriptive Statistics can be used for both sample and population data but cannot be used to perform inferential tests on population data. This is because the results obtained from descriptive analysis are definitive enough for the population of interest. The application of either Descriptive or Inferential statistics to a set of data largely depends on the levels or scales of measurement of underlying variables. In all, there are four (4) levels of measurement otherwise known as scale.

Nominal Scale

This is considered as the simplest and the least refined scale of measurement; one whose primary use is to provide a labelling function. A good example of this is the individual’s sex, which can be either male or female. There cannot be any other thing between these two. The Yes or No kinds of questions are also good examples of this. However, it lacks the property of order and magnitude.

Ordinal Scale

This kind of measurement also performs the labelling function apart from its ordering function. This is because it possesses the property of order and magnitude such that two things could be compared in terms of their relative magnitude. A good example of the Ordinal Scale relates to the degree of agreement with a statement such as Strongly Agree, Agree, Disagree, and Strongly Disagree. Using this scale to measure two units, one will be able to determine which is higher or lower and not just that they are not the same.

Interval Scale

This also has the property of order, magnitude and additivity since equal intervals on the scale represent that there is a difference with a magnitude. The scale does not posses absolute zero because the zero is arbitrarily set. In addition to its ordering function, this scale can be used to determine the difference between two units. Measuring the temperature of a room in Celsius and Fahrenheit is a good example of this scale.

Ratio Scale

This scale is the highest level of measurement because it has an absolute zero. As a general rule, whatever statistical methods are applicable to variable measured in the nominal scale can be applied to those measured in ordinal and interval/ratio scales. Similarly, those statistical methods applicable to variables measured in ordinal scale can also be applied to those measured in interval/ratio.

There are, however, statistical methods that are applicable to variables measured in interval/ratio that could not be applied to variables measured in the nominal scale. Some examples of the ratio scale include weight, time and speed; thus possessing all the properties of the other scales.

Must Read: Difference between Project-Writing and Research

Procedure and Tools for Data Analysis

In data analysis, there are procedures and tools to be employed depending on the type of research as well as the nature of the data to be analysed. Regardless of the instruments/methods used in data collection, and whether the data is from sample or population, the first step in data analysis is to describe the collected data. To do this, however, the data should be summarized either using a frequency table or chart. These two are veritable tools for presenting and communicating data in such writings as technical reports and journal articles.

The Frequency Table

There is no doubt that with the Frequency Table, the researcher can display the number of cases, which have each of the attributes of a given variable. It also serves to display both qualitative and quantitative data. When confronted with the number of attributes or categories of a variable that is too large, the Frequency Table adopts the grouped data approach by combining the attributes into classes.

E.g. with Age as a variable, the Frequency Table may present data

as: –

20-24 25-29 30-34 35-39 40-44

The Charts

Just like the Frequency Tables, there are also Charts, which serve similar purposes. The two most commonly used Charts are the Pie and Bar Charts. That is, both could be used to present data summaries and also used to interpret and convey the message more quickly, concisely and clearly than frequency tables. Their great limitation however lies in the fact that they hardly cope in situations where the attributes of a variable to display are too many, especially when these are more than nine.

This is particularly so for Pie Charts which are quite useful in providing vivid picture of data but only in showing the distribution of variables with single responses. Thus, they are inappropriate tools for variables associated with multiple responses from the units of the study. Also, while they are most applicable for qualitative data, Pie Charts also serve to display quantitative data particularly those whose number of attributes or categories is not more than five.

As for the Bar Charts, they serve for qualitative data in particular, irrespective of the nature of the responses to the variables, either single or multiple. Since Bar Charts make it easier to compare the categories of a variable, they are more suitable for displaying data with more than five categories. They also serve to display quantitative data, particularly, the variable presented in a discrete fashion. However, Histogram remains the more appropriate tool for displaying continuous variables.

Measures of Central Tendency

This is another approach to describing a set of data, considered useful in determining a typical attribute/value of a variable. The measure is also useful in comparing the performances of two or more groups or the performance of a group over two or more periods of time. The Mean, Mode and Median are the three most common Measures of Central Tendency.

The Mean

The Mean is the arithmetic average of a set of data usually applicable to quantitative data. To obtain the Mean, sum up all the scores in a set of data to be divided by the number of scores. With the distribution of the variable that is skewed, however, the Median will better represent the distribution, as extreme values tend to increase or decrease the Mean.

The Median

The Median is considered as the middle value in a set of data when all the values are arranged in order of magnitude. In other words, the Median tends to show the grouping together of scores around a central point, dividing a set of data into two main parts. In short, the middle scores between the upper half and the lower half is the Median. Although the Median is most appropriate for Ordinal Data, it is also applicable to Ordinal, Interval and Ratio Data.

The Mode

Meanwhile, the score, which has the largest frequency in a set of data, is referred to as the Mode. It refers to the most common attributes or value of a variable in which case it is possible for a set of data to have more than one Mode. Although most appropriate for Nominal Data, the Mode is also applicable to all types of data.

Measures of Variability

This is also known as the Measures of Dispersion in which a measure of variation or dispersion is calculated primarily to determine the homogeneity of a set of data. There are separate measures of variation for qualitative and quantitative data. For quantitative data, measures of variation include: –

(i) The Range

(ii) Standard Deviation

(iii) Variance or the Square of the Standard Deviation (iv) Coefficient of Variation

The Range

This refers to the difference between the highest and lowest attribute or value. Its primary objective is to give the researcher an idea of the data spread to determine the range for a grouped data, minus the highest limit from the lowest limit. Thus, the range is solely based on the two extreme values and fails to recognise how the data are actually distributed between these two values. Hence, the desirability of Standard Deviation to offset this inadequacy.

Standard Deviation

This is defined as the distance or the average deviation of all values from the Mean. The difference between each Score and the Mean is the Deviation Scores from the Mean. The bigger the Deviation, the more variable the set of Scores. The Standard Deviation is obtained by taking the square of the average of these deviations and divided by the number of Scores. Thus, it is an indication of the typical deviation of the values from the Mean. If the Standard Deviation is small, the group is considered homogeneous whereas a large Standard Deviation is an indication of a heterogeneous group.


This refers simply to the square of the Standard Deviation, obtained by subtracting each observation from the Mean (x), squaring the resulting difference (Xi -X) to eliminate negative signs of Deviation. They are added up to give the Sum of Squares (Xi-X) and finally dividing it by the number of observation ‘n’.

Coefficient of Variation

This is the Ratio of a distribution’s Standard Deviation expressed to its Mean, multiplied by 100, and is independent of the unit of measurement. Coefficient of Variation is employed when comparing the Variability of two sets of data particularly when they are expressed in different units of measurement.

We Recommend: Project Writing tips

Statistical Hypothesis Testing

Unlike the general discussion on hypotheses as earlier on presented, the topic is being re-visited here (under data analysis), with particular reference to Inferential Statistics. By Inferential Statistics, we refer to drawing conclusions regarding the Population of the Study based on the information obtained from the Sample. It means that this kind of Statistics will not be relevant in situations such as when one is working with Population Data and when one is not interested in making a general statement about the Population. At the centre of Inferential Statistics is the concept of Hypothesis Testing. This refers to the process whereby the research infers from a sample whether or not to accept a statement about the Population; where the statement itself is the Hypothesis.

Hypotheses are stated either in the Null or Alternative forms for the researcher to validate; even though that the Null Hypothesis remains the more commonly used of the two. As a matter of fact, it is always the Null Hypothesis that gets tested and it is mainly on the condition that it is rejected that one can accept the Alternative Hypotheses.

When testing Hypotheses, the maximum probability with which one may be willing to reject the Null Hypothesis is referred to as the Level of Significance. It is common practice to use an alpha level of 0.05 or 0.01; meaning that there are 5 or 1 of 100 chances of committing Type 1 Error. When the Reject Decision has been made at 0.05 level, it means that the outcome of the experiment is statistically significant at the 0.05% level.

The procedure, which enables one to decide whether to Reject or Accept Hypotheses or to determine whether observed Samples differ significantly from expected results is differently referred to as Test of Significance, Rules of Decision, or Test of Hypothesis. Thus, if against the assumption that a particular hypothesis is true, we find results observed in a random sample differ markedly from those under the hypothesis, we then conclude that the difference is Significant. On this basis, we can Reject the Null Hypothesis. Errors are sometimes made in Hypothesis testing and these have been categorized into: –

C a) Type 1 Error Cb) Type 11 Error

In a situation where we Reject the Null Hypothesis when, in fact, we should Accept it, it is said that we have committed a Type 1 Error of decision or judgement. On the other hand, if we Accept the Null Hypothesis when we should, indeed, reject it, we are said to have committed Type 11 Error. Such errors usually lead to wrong decisions.

To have a good Test of Hypothesis, there must a design to minimise these errors of decision. A sure way of doing this is to increase our sample size, since the larger the Sample Size, the less the possible errors. Some of the several kinds of Inferential Tests often employed in the analyses of data include: –

(a) T-Test

(b) Analysis of Variance Cc) Chi-Square

(d) Correlation and Regression Analyses


This is normally used to compare the Means of two groups of data; which means that the data being compared should be quantitative. These two groups of data may be for two independent samples or may be for the same sample with the data collected at two different periods {i.e. paired samples}. If, based on the observed p-value, it is decided that the two groups are different, then, one should be able to state which group has the larger Mean.

Analysis of Variance

This Test, commonly referred to as ANOVA, is normally used to examine the effects of qualitative independent variables on a quantitative dependent variable. The One-way ANOVA is its simplest form and is used for comparing the Means for several groups. If, in the end, the Null Hypothesis is Accepted, it indicates that the Means for all the groups are the same. On the other hand, a Rejected Null Hypothesis indicates that not all the Means are the same even as it does not mean that they are all different. To ascertain which pairs of means are different, it becomes necessary to conduct a multiple comparison test.


This kind of Test is often used to determine the existence of a relationship between two qualitative variables. Before applying the Test at all, a Contingency Table {Cross-tabulation} is usually formed to study the patterns of frequencies in the Table. If, at the end, the Null Hypothesis is Rejected, it means that there is a relationship between the two variables. It is after this that measures are used to determine the strength of the relationship

Correlation and Regression Analyses

These are used to study existing relationship among quantitative variables; and especially that between two quantitative variables. In particular, Correlation Analysis measures the strength of the relationship between the two variables, while the Repression Analysis develops an equation that enables one to predict the value of the Dependent Variable for different values of the Independent Variable.

These two methods are commonly used either as Descriptive or Inferential procedures. As a Descriptive procedure, a Correlation Coefficient is calculated to determine the strength of relationship between two variables. As an Inferential procedure, Correlation Analysis determines whether the observed correlation between the variables as determined from the sample can be generalized on the population.

The procedure requires that the p- value is calculated and used to Accept or Reject the Null Hypothesis. If the Null Hypothesis is accepted {i.e. there is no correlation between the two variables in the population}, there is no need to obtain a Regression Equation, as it cannot be used to predict the value of the dependent variable.


Sulaiman, S. N. {1997} Statistics & Analytical Methods for Researchers. Kaduna. NDA Computer Centre.